ADC-V522IR Indoor Camera WiFi & Alarm.com Setup

Router Connection

Connect the camera to the network router by one of two methods

Ethernet Cable

Plug Ethernet cable into camera and port on customer's router then wait 2 minutes

WIFI WPS protected setup mode

1. Insert paperclip into hole and hold button for 5 seconds, blue LED flashes

ADC-V522IR_Camera_WPS_Enrollment.jpg 
2. Press and release WPS button on router or enable WPS mode in router programming

Screenshot_at_Dec_02_16-59-54.png

3. Wait 2 minutes, if successful camera LED turns green, if failure LED turns red

Alarm.com Setup

1. From the customer website press Video

01_Home_Page.png

2. Press Settings

02_Video_Page.png

3. Press Add Video Device

03_Video_Settings.png

4. If the camera is found press Name then enter the camera name then press INSTALL

04_Add_V521_Camera_-_Camera_Found.png

5. Alarm.com sends configuration data to the camera, this may take several minutes

05_Add_V521_Camera_-_Configuring.png

6. When finished press Live View to view camera image

06_Add_V521_Camera_-_Installation_Complete.png

7. If connected by Ethernet cable and needing to configure WiFi press SETTINGS

07_Add_Camera_-_Live_View_Program_Wireless.png

8. Select camera from drop-down box

Select_Camera.png

9. Scroll down and select Wireless Network

08_Add_Camera_-_Select_Wireless_Settings.png

10. Press SCAN

09_Add_Camera_-_Choose_Method.png

11. Select wireless network

Alarm.com_Setup_10.png

12. Enter WiFi encryption then press NEXT

Alarm.com_Setup_11.png

13. Unplug Ethernet cable then cycle power to the camera and wait 2 minutes to reboot

11_Add_V521_Camera_-_Wireless_Complete.png

Was this article helpful?
1 out of 2 found this helpful

Comments

2 comments

Please sign in to leave a comment.