1. Help Center
  2. Panel Programming
  3. Qolsys IQ Panel 2

Qolsys IQ Panel 2 - Programming A Remote Keyfob

1. Swipe down from the clock display at the top of the screen then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Installation_Screen.png 6.png

4. Press SECURITY SENSORS then AUTO LEARN SENSORS

7.png 8.png

5. Hold both LOCK and UNLOCK buttons to learn then press OK to confirm

 Auto_Learn_Confirm.png

 G.E._Keychain_Final.jpgEcoLink_Keychain_Final.jpg

6. Program keyfob settings then press ADD NEW to save then HOME to exit

Add_Sensors_02_Keyfob.jpg Auto_Learn_Sensor_12_Exit.jpg

  1. Sensor DL ID: Leave this alone
  2. Sensor Type: Select “Keyfob”
  3. Sensor Name: Select "Keyfob" or create a "Custom Description"
  4. Chime Type: Leave this at "None"
  5. Sensor Group: Set this to "1-Mobile Intrusion"
  6. Voice Prompts: Leave this alone

 

Was this article helpful?
2 out of 3 found this helpful

Articles in this section

See more