Qolsys IQ Panel 2 - Programming a Smoke Detector

1. Swipe down from the clock display at the top of the screen then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press INSTALLATION then DEVICES

Installation_Screen.png 6.png

4. Press SECURITY SENSORS then AUTO LEARN SENSORS

7.png 8.png

5. Remove the sensor from the base to learn then press OK to confirm

 Auto_Learn_Confirm.png

Smoke_Detector_2.png

6. Enter sensor settings then press ADD NEW to save then HOME to exit

11.png Auto_Learn_Sensor_12_Exit.jpg

Sensor DL ID: Leave this option alone
Sensor Type: Select “Smoke Detector”
Sensor Name: Select an appropriate name or create a "Custom Description"
Chime Type: This allows you to apply a specific sound to your device when it’s tampered
Sensor Group:  Set to 26 "Smoke Heat"
Voice Prompts: Leave this option alone

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.