Qolsys IQ Panel 2 - Programming A FireFighter Audio Sensor

The FireFighter's unique technology monitors the alarm activity of existing smoke and carbon monoxide detectors and when an alarm tone is detected, a signal is sent to the panel for emergency response.thin

 

Sensor Installation

1. Open the cover to the sensor by pressing the button on the side

001b.pngFireFighter_Side_Final.jpg

 

2. Install the battery, then replace the cover
Front_top_view_copy.png

 

3. Mount the FireFighter within 6 inches of the smoke or carbon monoxide detector

002b.png

 

4. The side audio holes must face the detector

003b.png

 

5. Screw the mounting bracket to the wall, then slide the sensor onto the bracket

004b.png

 

6. Secure the FireFighter to the bracket using the small screw provided

005b.png

 

IQ Panel 2 Programming

 

1. Swipe down from the clock display at the top of the screen, then press Settings

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

 

2. Press ADVANCED SETTINGS, then enter the Installer Code 1111 or 2222

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

 

3. Press INSTALLATION, then DEVICES

Installation_Screen.png 6.png

 

4. Press SECURITY SENSORS, then AUTO LEARN SENSORS

7.png 8.png

 

5. Remove the FireFighter cover to learn, then press OK to confirm

 Auto_Learn_Confirm.png

FireFighter_Side_Final.jpg  

6. Program sensor settings, press ADD NEW to save, then HOME to exit

 

Add_Sensors_02_Smoke_Detector.jpg Auto_Learn_Sensor_12_Exit.jpg

  • Sensor DL ID: Leave this alone
  • Sensor Type: Select “Smoke Detector”
  • Sensor Name: Select an appropriate name or create a "Custom Description"
  • Chime Type: Leave this alone
  • Sensor Group: Select 26.
  • Voice Prompts: Leave this alone

 

Was this article helpful?
0 out of 0 found this helpful