How to replace the backup battery for the IQ Panel 2

Please follow the steps below to replace the IQ Panel 2 backup battery: 


1. Swipe down from the time display to open the Settings drop-down, then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg


2. Press ADVANCED SETTINGS, then enter your Master Code

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg


3. Press POWER DOWN, then OK to confirm. The IQ Panel 2 will power down.

Power_Down_01.jpg Power_Down_02.jpg


4. Remove the bottom screw, then press both bottom tabs to remove the front cover



5. Rotate the front cover down and hang strap onto backplate



6. Unplug the battery connector from the circuit board, then pull the blue battery tab to remove



7. Remove adhesive from the new battery, stick into case and plug in the connector



8. Fasten front cover to the backplate, then hold the right side button for 3 to 4 seconds to power back up


Was this article helpful?
2 out of 7 found this helpful