IQ Panel 2 - Replace Backup Battery

1. Swipe down from time display to open Settings Drop-Down then press SETTINGS

Enter_Program_01_Main.jpg Enter_Program_02_Dropdown.jpg

2. Press ADVANCED SETTINGS, then enter Master Code

Enter_Program_03_Settings_Menu.jpg Enter_Program_04_Enter_Code.jpg

3. Press POWER DOWN then press OK to confirm, IQ Panel 2 will turn off. 

Power_Down_01.jpg Power_Down_02.jpg

4. Remove bottom screen then press both bottom tabs to remove front face-plate


5. Rotate the front cover down and hang strap onto back plate


6. Unplug battery connector from circuit board then pull blue battery tab to remove


7. Remove adhesive from new battery and stick into case and plug in connector


8. Fasten front to the back plate then hold right side button for 3 to 4 seconds to power up


Was this article helpful?
2 out of 5 found this helpful



Please sign in to leave a comment.