Simon XTi - Programming Remote Touchscreens


1. Press the GEAR icon at the bottom right of the screen then press DOWN ARROW 3 times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter the Installer Code 4321 then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg


Programming_-_Learn_Sensor_01.png Programming_-_Learn_Sensor_02.png

4. Learn sensor by enrolling keypad (step 5 below), if successful Simon XTi beeps and displays sensor information

Programming_-_Learn_Sensor_03.png Programming_-_Learn_Sensor_04.png

5. On the remote Touchscreen press the GEAR icon then press DOWN arrow 3 times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

6. Press the CLEAR & ENROLL button, the touchscreen downloads information and states if successful

Settings_Screen_5.jpg Settings_Screen_6.jpg

7. (Optional) On the Simon XTi press EDIT by Sensor Number then enter new sensor number then press SAVE to exit

Programming_-_Learn_Sensor_04a_Sensor_Number.png Programming_-_Learn_Sensor_05_Sensor_Number.png

8. Press EDIT by Sensor Group then enter 1 then press SAVE to exit

Programming_-_Learn_Sensor_04b_Sensor_Group.png Programming_-_Learn_Sensor_06_Sensor_Group.png

7. Press EDIT by Sensor Name then press EDIT by 1st, 2nd or 3rd word

Programming_-_Learn_Sensor_04c_Sensor_Name.png Programming_-_Learn_Sensor_07_Sensor_Name.png

8. Scroll words with arrow buttons then press to select then press SAVE then CLOSE to exit

Programming_-_Learn_Sensor_08_Sensor_Name_List_1.png Programming_-_Learn_Sensor_07a_Sensor_Name_Exit.png

9. Press CLOSE twice to exit sensor programming

 Programming_-_Learn_Sensor_09_Exit_Sensor_Exit.png Programming_-_Delete_Sensors_05.png

10. Press CLOSE again to exit programming

Exit_Programming_01_Exit.jpg Home.jpg

Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.