1. Help Center
  2. Interlogix Simon XTi
  3. Simon XTi Installation Programming

Simon XTi - Remote Touchscreen Programming

Avatar
Follow

 1. Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter Installer Code 4321 then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press SENSORS then LEARN SENSOR

Programming_-_Learn_Sensor_01.png Programming_-_Learn_Sensor_02.png

4. Simon XTi enters Sensor Learn mode

Programming_-_Learn_Sensor_03.png 

5. On remote Touchscreen press bottom right GEAR icon then DOWN ARROW 3 times

Enter_Programming_05.jpg Enter_Programming_06.jpg

6. Press CLEAR & ENROLL button, touchscreen downloads information successful

Settings_Screen_5.jpg Settings_Screen_6.jpg

 7. Press EDIT by Sensor Group then enter 1 then press SAVE to exit

Programming_-_Learn_Sensor_04b_Sensor_Group.png Programming_-_Learn_Sensor_05_Sensor_Number.png

8. Press EDIT by Sensor Name then press EDIT by 1st, 2nd or 3rd word

Programming_-_Learn_Sensor_04c_Sensor_Name.png Programming_-_Learn_Sensor_07_Sensor_Name.png

9. Scroll words with arrow buttons then select then press SAVE then CLOSE to exit

Programming_-_Learn_Sensor_08_Sensor_Name_List_1.png Programming_-_Learn_Sensor_07a_Sensor_Name_Exit.png

9. Press CLOSE several times to exit programming

Programming_-_Learn_Sensor_09_Exit_Sensor_Exit.png Home.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more