Qolsys IQ Panel 2 - IQ Glassbreak Detector Installation Guide

1. Identify the location for the sensor from the label on the box

1.jpg

2. Remove the sensor from the box. Open the cover by pressing the tab

2.jpg

3. Remove the plastic battery tabs and close the cover

3.jpg

4. Locate the sensor on the ceiling within 15 feet of the windows to be protected

4.jpg

5. Apply tape to back of the sensor then remove the backing and  apply pressure for 10 seconds for a solid mount

5.jpg

Was this article helpful?
1 out of 2 found this helpful

Comments

0 comments

Please sign in to leave a comment.