Qolsys IQ Panel 2 - IQ Motion Detector Installation Guide

1. Identify the location for the sensor from the label on the box

1.jpg

2. The detector must be 7-8 feet from the floor in the corner of the room

2.jpg

3. Clean and dry the wall before mounting the device

3.jpg

4. Remove the backing from the double-sided tape and apply pressure for over 10 seconds

4.jpg

5. The coverage area is 20 feet

5.jpg

Was this article helpful?
4 out of 4 found this helpful

Comments

0 comments

Please sign in to leave a comment.