1. Identify the location for the sensor from the label on the box

1.jpg

2. The detector must be 7-8 feet from the floor in the corner of the room

2.jpg

3. Clean and dry the wall before mounting the device

3.jpg

4. Remove tape backing and apply pressure against wall for 10 seconds

4.jpg

5. The coverage area is 20 feet

5.jpg

Notes:

  • For pet immunity do not point the motion detector at stairs, bookshelves or high furniture
  • Do not point motion at windows that face the sun or bright light

 

Was this article helpful?
4 out of 4 found this helpful

Comments

0 comments

Please sign in to leave a comment.