Simon XT - Change Sensor Programming

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SYSTEM PROGRAMMING then press OK_Button_2.jpg

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter Installer Code 4321 (Call Brinks Home Security if this code is different)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SENSORS then press OK_Button_2.jpg

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until EDIT SENSOR then press OK_Button_2.jpg

Simon_XT_Edit_Sensor_01.png Simon_XT_Then.jpg Simon_XT_Edit_Sensor_02.png

5. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg button to scroll sensors then press OK_Button_2.jpg to select

Simon_XT_Edit_Sensor_02.png Simon_XT_Then.jpg Simon_XT_Edit_Sensor_03a.png   

6. Grp flashes, enter new Sensor Group then press OK_Button_2.jpg (See list at bottom of page)

Simon_XT_Edit_Sensor_03.png Simon_XT_Then.jpg Simon_XT_Edit_Sensor_04.png

7. 1st sensor word flashes, scroll words with Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg then press OK_Button_2.jpg to select

Simon_XT_Edit_Sensor_04.png Simon_XT_Then.jpg Simon_XT_Edit_Sensor_05.png

8. 2nd sensor word flashesscroll words with Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg then press OK_Button_2.jpg to select

Simon_XT_Edit_Sensor_05.png Simon_XT_Then.jpg Simon_XT_Edit_Sensor_06.png

9. When finished press STATUS several times to exit
Simon_XT_Status_Mini.jpg
Simon_XT_Sensor_Groups.png
Simon_XT_Sensor_Descriptors.png
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.