Simon XT - Replace The Backup Battery

1. Remove the screw located at the top of the panel (Screw is optional) then place thumbs on tabs to swing cover down

Battery_Replacement.jpg

2. Apply pressure to spread the battery clips then remove old battery 

Battery_Replacement_2.jpg

3. Disconnect the wires from the old battery then connect the new battery (red wire to red terminal and black wire to black terminal)

Batt.jpg

4. Install battery then close front cover

Simon_XT_v1.3_Front.jpg 

Was this article helpful?
3 out of 4 found this helpful

Comments

0 comments

Please sign in to leave a comment.