Simon XT - Performing A Sensor Test

 The screens are below for a quick summary:

Test_a_sensor.png

 

See sensor list below on how to test each sensor...

  1. Door/Window Sensor - Open and close the door/window.
  2. Motion - disconnect the front of the motion sensor from the back plate the snap it back on. There is a ribbed button you press on the bottom of the motion which will allow you to do this.
  3. Smoke or CO Detector - Twist off the cover as you would do to get to the batteries then put it back on. 
  4. IQ Temp - Remove the casing by taking a flat blade screwdriver and pressing the tab on the side of the sensor.
  5. IQ Flood - Remove the casing by taking a flat blade screwdriver and pressing the tab on the side of the sensor.
  6. IQ Glassbreak - Remove the casing by applying pressure to the rectangular area on the front of the device and pull the casing off. Then press the black tamper switch. 
  7. Keyfob - Hold the "Lock" and "Unlock" buttons for 2 seconds.

 

Was this article helpful?
1 out of 2 found this helpful

Comments

1 comment
  • The video cuts off at the end; missing instructions for completion of testing.

Please sign in to leave a comment.