Simon XT - Sensor Test

 1. Press Simon_XT_Scroll_Down_3.jpg until Sensor Tests then press OK_Button_2.jpg

Simon_XT_Disarmed.pngSimon_XT_Then.jpgSimon_XT_Sensor_Test_1.png

2. Enter Master Code then press OK_Button_2.jpg

Enter_Code.pngSimon_XT_Then.jpgSimon_XT_Sensor_Test_1.png

3. Open Door or Window or walk by motion detector or press keyfob button

Open_Door.jpg Open_Window.jpg  Motion_Detector_Test.jpg TX-4014-01_4-Button_Keyfob_Disarm.jpg

  • Door/Window Sensor - Open and close the door or window
  • Motion - Press top button then remove and replace front of motion
  • Smoke or CO Detector - Hold test button
  • IQ Flood Detector - Open cover to tamper
  • IQ Glassbreak - Pull cover from base-place 

4. Simon XT beeps 1 to 8 times indicating signal strength

Simon_XT_Sensor_Test_2.pngSimon_XT_Then.jpgSimon_XT_Sensor_Test_6.png

  • 1 to 3 beeps = Poor
  • 4 to 5 beeps = Marginal
  • 6 to 8 beeps = Excellent

 5. Sensor Tests exits when all sensors are tested or by pressing STATUS

Simon_XT_v1.3_Scroll_Buttons.jpg

 

Was this article helpful?
1 out of 2 found this helpful

Comments

1 comment
  • The video cuts off at the end; missing instructions for completion of testing.

    0
    Comment actions Permalink

Please sign in to leave a comment.