Simon XT - Programming TX-1010 SlimLine Door Sensor

1. Press UP or DOWN ARROW button until SYSTEM PROGRAMMING then press OK

2. Enter the Installer Code 4321 (Call Brinks Home Security if this code is different)

3. Press UP or DOWN ARROW button until SENSORS then press OK

4. Press OK again to place the panel in learn mode

5. Insert screwdriver into side slot then twist to remove sensor cover to learn

6. The Simon XT beeps and Grp flashes, enter 10 for delay sensor or 13 for instant then press OK

7. Sensor name flashes, press UP or DOWN ARROW buttons to scroll names then press OK to select

8. Press 102 to create a space then press OK

9. Press UP or DOWN ARROW buttons to scroll next word then press OK (up to 16 words)

10. When finished press OK

11. Press STATUS button several times to exit 

12. Press STATUS button twice to exit sensor programming

13. Press STATUS button again to exit installer programming