Simon XT - Programming Glass Break Detector

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press UP or DOWN ARROW button until SYSTEM PROGRAMMING then press OK

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter the Installer Code 4321 (Call Brinks Home Security if this code is different)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press UP or DOWN ARROW button until SENSORS then press OK

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press OK again to place the panel in learn mode

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_03.png

5. Grasp the glassbreak cover and pull up from the sensor body to learn then place the cover back on the sensor bodyPicture3.png

6. The Simon XT beeps and Grp flashes, enter 13 then press OK

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06aa_Glassbreak.png

7. Sensor name flashes, press UP or DOWN ARROW buttons to scroll names then press OK to select

Simon_XT_Sensor_Program_06b_Glassbreak.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06c_Glassbreak.png

8. Press 102 to create a space then press OK

Simon_XT_Sensor_Program_06c_Glassbreak.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06d_Glassbreak.png

9. Press UP or DOWN ARROW buttons to scroll next word then press OK (up to 16 words can be programmed)

Simon_XT_Sensor_Program_06d_Glassbreak.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06e_Glassbreak.png

10. When finished press OK

Simon_XT_Sensor_Program_06e_Glassbreak.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

11. Press STATUS button several times to exit 

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_01.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.