Simon XT - Programming EcoLink Remote Keyfob

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press UP or DOWN ARROW button until SYSTEM PROGRAMMING then press OK

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter the Installer Code 4321 (Call Brinks Home Security if this code is different)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press UP or DOWN ARROW button until SENSORS then press OK

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press OK again to place the panel in learn mode

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_03.png

5. Hold LOCK and UNLOCK buttons at the same time to learn

Graphic_1.png

6. The Simon XT beeps and Grp flashes, enter 1 to program the police panic then press OK

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg 

7. Sensor name flashes, press UP or DOWN ARROW buttons to scroll names then press OK to select

Simon_XT_Sensor_Program_06b_Glassbreak.png Simon_XT_Then.jpg 

8. Press 102 to create a space then press OK

 Simon_XT_Then.jpg

9. Press UP or DOWN ARROW buttons to scroll next word then press OK (up to 16 words)

Simon_XT_Then.jpg 

10. When finished press OK

Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

11. Press STATUS button twice to exit sensor programming

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_01.png

12. Press STATUS button again to exit installer programming

Simon_XT_System_Programming.png Simon_XT_Then.jpg Simon_XT_Disarmed.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.