1. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SYSTEM PROGRAMMING then press OK_Button_2.jpg

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter the Installer Code 4321 (Call Brinks Home Security if this code is different)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SENSORS then press OK_Button_2.jpg

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press OK_Button_2.jpg again to place Simon XT into learn mode

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_03.png

5. Hold LOCK and UNLOCK buttons at the same time to learn



6. Simon XT beeps and Grp flashes, enter 1 to enable police panic then press OK_Button_2.jpg

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg 006b_mceclip0.png

7. Sensor name flashes, press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg to scroll names then press OK_Button_2.jpg

Simon_XT_Sensor_Program_06b_Glassbreak.png Simon_XT_Then.jpg 007b_mceclip1.png

8. Press 102 to create a space then press OK_Button_2.jpg

008a_mceclip3.png Simon_XT_Then.jpg 008b_mceclip2.png

9. Press  Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg to scroll next word then press OK_Button_2.jpg (up to 16 words)

009a_mceclip5.png Simon_XT_Then.jpg  009b_mceclip6.png

10. When finished press OK_Button_2.jpg to save

010a_mceclip5.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

11. Press STATUS several times to exit
Was this article helpful?
0 out of 0 found this helpful