1. Help Center
  2. Interlogix Simon XT
  3. Simon XT Installation Programming

Simon XT - Smoke Detector Programming

Avatar
Follow

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SYSTEM PROGRAMMING then press OK_Button_2.jpg

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter Installer Code 4321 (Call Brinks Home Security if this code does not work)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SENSORS then press OK_Button_2.jpg

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press OK_Button_2.jpg again to place the panel in learn mode

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_03.png

5. Twist to remove smoke detector from base to learn

 gra 1.png 

6. Simon XT beeps and Grp flashes, press OK_Button_2.jpg then enter group 26

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg Sensor_Program_Sn_26_Front_Door.png

7. Sensor name flashes, press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg to scroll names then press OK_Button_2.jpg to select

Sensor_Program_Sn_26_Front_Door_Highlighted.png Simon_XT_Then.jpg Sensor_Program_Sn_26_Smoke_Detector_1.png

8. When finished press OK_Button_2.jpg to save

Sensor_Program_Sn_26_Smoke_Detector_2.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

9. Press STATUS several times to exit
Simon_XT_Status_Mini.jpg
Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more