1. Help Center
  2. Interlogix Simon XT
  3. Simon XT Installation Programming

Simon XT - Temperature Sensor Programming

Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SYSTEM PROGRAMMING then press OK_Button_2.jpg

Simon_XT_Disarmed.png Simon_XT_Then.jpg Simon_XT_System_Programming.png  

2. Enter Installer Code 4321 (Call Brinks Home Security if this code is different)

Simon_XT_Enter_Code.png Simon_XT_Then.jpg Simon_XT_Access_Codes_Main.png

3. Press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg until SENSORS then press OK_Button_2.jpg

Simon_XT_Sensor_Program_01.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_02.png

4. Press OK_Button_2.jpg again to place the panel in learn mode

Simon_XT_Sensor_Program_02.png Simon_XT_Then.jpg  Simon_XT_Sensor_Program_03.png

5. Press end tab with screwdriver then remove cover to learn

Graphic_1.png  

6. Simon XT beeps and Grp flashes, enter 29 for Freeze Sensor then press OK_Button_2.jpg

Simon_XT_Sensor_Program_06a_Glassbreak.png Simon_XT_Then.jpg Sensor_Program_Sn_29_Front_Door.png

7. Sensor name flashes, press Simon_XT_Scroll_Up_3.jpg or Simon_XT_Scroll_Down_3.jpg to scroll names then press OK_Button_2.jpg

Sensor_Program_Sn_29_Front_Door_Highlighted.png Simon_XT_Then.jpg Sensor_Program_Sn_29_Freeze_Sensor_1.png

8. When finished press OK_Button_2.jpg

Sensor_Program_Sn_29_Freeze_Sensor_2.png Simon_XT_Then.jpg Simon_XT_Sensor_Program_06f_Glassbreak_Trip_Sensor_11.png

9. Press STATUS several times to exit
Simon_XT_Status_Mini.jpg
Was this article helpful?
1 out of 1 found this helpful

Articles in this section

See more