Simon XT - Changing Volume and Voice Settings

The Panel beeps are generally very helpful, but sometimes they can be a too loud or annoying

Here is a few options you have with your sirens and beeps

siren_options.png

1. Piezo Beeps:

- These are the beeps the panel makes for system activity (eg. I opened the front door and my panel beeped. When I arm the panel my alarm beeps until it arms)

~  Can turn these off and on.
 

2. Panel Voice:

- Announces arming levels (eg. When I push the "Status" button the panel tells me "System OK"
~  Can turn these notifications off and on.
 

3. Panel Piezo Alarm:

- These are the alarms the panel makes in the event of a fire, a break in, or the like
~  Can turn these off and on
 

4. Trouble Beeps: 

- Determines whether the panel and interior sirens beep every minute when there is a trouble condition. (eg. I have a Low Battery and my panel keeps beeping.)
~  Can turn these off and on.
~  Hitting the "Satus" button immediately followed by the "Disarm" button will also silence these beeps for 4 hours.
 

5. Voice Chime: 

- Determines how the panel talks to you. (eg. When I open the front door my panel tells me Front Door Open, I can be change that to beep instead of telling me that.)
~ 1 = Sensor Name
~ 2 = Loud ding-dong bell
~ 3 = Soft ding-dong bell
~ Off = no sound
 

6. Status Beep Volume: 

- Determines the panel piezo volume level for status beeps in the above sections 1, and 4.
~ Volume levels 1-10.
 

7. HW siren sup.:

- Determines whether the panel monitors the siren's status; whether it is connected or if the wires have been cut. This requires a 4.7 KOhm resistor placed between the 2 wires preferably up the wire a ways. 
 

8. Speaker Volume:

- Sets the volume for the voice communications in the above section 2, and 5.
~ Volume levels 1-8
 

9. Silent police alarm: 

- The "Police Alarm" button on the bottom left corner can be set so that the police are notified but no audible alarm is sent.
~ If it is on a silent alarm is sent; if it is off the police would be notified and the siren would go off as well.
 

10. Panel Tamper Alarm:

- This determines whether the panel will send an alarm if the cover of the panel is removed.
~ Can be turned off and on
Was this article helpful?
4 out of 4 found this helpful

Comments

0 comments

Please sign in to leave a comment.