1. Help Center
  2. Interlogix Simon XT
  3. Simon XT User Functions

Simon XT - Volume and Voice Settings

Avatar
Follow

 Simon_XT_v1.3_Scroll_Buttons.jpg

1. Press Simon_XT_Scroll_Down_3.jpg or Simon_XT_Scroll_Up_3.jpg until System Programming then press OK_Button_2.jpg

Simon_XT_Disarmed.pngSimon_XT_Then.jpgSimon_XT_System_Programming.png 

2. Enter Installer Code 4321

Enter_Code.pngSimon_XT_Then.jpgSimon_XT_Access_Codes_1.png

3. Press Simon_XT_Scroll_Down_3.jpg until Siren Options then press OK_Button_2.jpg

Simon_XT_Access_Codes_1.pngSimon_XT_Then.jpgSimon_XT_Siren_Options.png

4. Scroll options with Simon_XT_Scroll_Down_3.jpg or Simon_XT_Scroll_Up_3.jpg then press OK_Button_2.jpg to select

5. Change options with Simon_XT_Scroll_Down_3.jpg or Simon_XT_Scroll_Up_3.jpg then press OK_Button_2.jpg to save

6. Piezo Beeps sounds during system activity

Simon_XT_Siren_Options_Piezo_Beeps.png

7. Panel Voice announces arming levels Armed Stay or Armed Away or System is OK

Simon_XT_Siren_Options_Panel_Voice.png

8. Panel Piezo Alarm determines if panel siren sounds during an alarm

Simon_XT_Siren_Options_Panel_Piezo_Beeps.png

9. Trouble Beeps sounds every minute when there is a trouble condition

Simon_XT_Siren_Options_Trouble_Beeps.png

10. Voice Chime sounds when sensor opens, enter 1 to 3 or press DISARM for OFF

Simon_XT_Siren_Options_Voice_Chime.png

  • 1 = Sensor Name
  • 2 = Loud ding-dong bell
  • 3 = Soft ding-dong bell
  • Off = No sound

11. Status Beep Volume determines volume level for status beeps, enter 1 to 10

Simon_XT_Siren_Options_Status_Beep_Volume.png

12. Speaker Volume sets the volume for voice communications, enter 1 to 8

Simon_XT_Siren_Options_Speaker_Volume.png

13. Press STATUS several times to exit
Simon_XT_Status_Mini.jpg
Was this article helpful?
4 out of 4 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more