ADC-V722W Outdoor Camera WiFi and Alarm.com Setup

Connect camera to the network router by one of two methods

 WPS WiFi Protected Setup Mode

1. Hold WPS button for 5 seconds or until LED flashes blue

2. Press and release WPS button on router or enable WPS mode in router programming

3. Wait 2 minutes, camera LED turns green if successful or red if failure

Access Point Mode

1. Hold WPS button for 6 to 7 seconds until LED flashes white

2. Go to smartphone WiFi settings, look for ALARM (xx:xx:xx) then press CONNECT

  

3. Open web browser and enter 192.168.1.1, camera menu appears, select language

ADC-V722_WiFi_Setup_04_Connected.png  ADC-V722_WiFi_Setup_06_Web_Main_.png

4. Press SCAN FOR WI-FI NETWORKS, then select WiFi network

ADC-V722_WiFi_Setup_07_Scan_For_WiFi_Networks.png ADC-V722_WiFi_Setup_08_Scanning_.png ADC-V722_WiFi_Setup_09_Select_WiFi_Network.png

5. Press SECURITY KEY then enter WiFi encryption key then press SAVE then OK to exit

ADC-V722_WiFi_Setup_10_Select_Encryption.png ADC-V722_WiFi_Setup_11_Enter_Encryption.png ADC-V722_WiFi_Setup_12_Connecting.png

6. Camera LED turns green if successful or red if failure

Add Camera To Alarm.com Account

1. From the customer website press Video

01_Home_Page.png

2. Press Settings

02_Video_Page.png

3. Press Add Video Device

03_Video_Settings.png

4. If camera is found press Name then enter the camera name then press INSTALL

04_Add_V721W_Outdoor_Camera_-_Camera_Found.png

5. Alarm.com sends information to camera, this may take several minutes

05_Add_V721W_Outdoor_Camera_-_Configuring.png

6. When finished press Live View to view camera image

06_Add_V721W_Outdoor_Camera_-_Installation_Complete.png

Was this article helpful?
1 out of 3 found this helpful

Comments

0 comments

Please sign in to leave a comment.