Outdoor Camera - WiFi and Alarm.com Setup

Connect camera to the network router by one of two methods

 WPS WiFi Protected Setup Mode (Method 1)

1. Hold the back WPS button for 5 seconds or until the LED flashes blue

2. Press and release WPS button on router or enable WPS learn mode in router programming

3. Wait 2 minutes for the camera LED to flash then turn solid green

Or by Access Point Mode (Method 2)

1. Hold the back WPS button for 6 to 7 seconds until LED flashes white

2. From a smartphone or tablet go to WiFi settings, look for ALARM (Last 6 digits of MAC address) then press CONNECT


3. Open a web browser and enter, camera's configuration menu appears, select language


4. Press SCAN FOR WI-FI NETWORKS, when found select WiFi network


5. Press SECURITY KEY then enter WiFi encryption key then press SAVE then OK to exit


5. Camera LED turns green if successful or stays red if failure

Add Camera To Alarm.com Account

1. From the customer website select Video


2. Select Settings


3. Select Add Video Device


4. If the camera is found press Name then enter the camera name then press INSTALL


5. Alarm.com sends configuration data to the camera, this may take several minutes


6. When finished press Live View to view camera image



Was this article helpful?
1 out of 3 found this helpful



Please sign in to leave a comment.