DSC - Bypassing Sensors

LED Keypads

You can bypass any zones after the system is armed by following the following steps:

Press * then 1 then enter Sensor or Sensors 01 to 64 then press #, BYPASS light turns ON

DSC_Bypass.jpg

Alphanumeric LCD Keypads

1. Press * then 1 then press 01 to 64 to select sensor or press < > buttons to scroll sensors then press * to select

  

2. B appears indicating sensor is bypassed, press # to exit

  

3. Press STAY or AWAY button to arm, keypad beeps 6 times and ARMED light turns ON

    

Note: Smoke, Heat and Carbon Monoxide detectors cannot be bypassed

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.