Interlogix Concord - Program Motion Detector

 

3. Press 080 then press #

  

4. Enter Partition 1 to 6 then press #

5. Enter Sensor Group 17 for interior sensor or 20 for interior with delay then press # to enter learn mode

  

6. Press top button to remove motion sensor from backplate to learn learn

Motion_Detector_Battery_Replacement_60-807_1.jpg

 

7. Keypad beeps if successful and moves to next sensor, press * to exit

8. Press * twice to exit sensor programming

 

9. Press * again then press A or B keys to scroll to EXIT PROGRAMMING then press #

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.