Qolsys IQ Panel - Installing A Smoke Detector


1. Insert the batteries in the back of the device.


 Recommended Locations

The smoke detector is best located between bedroom areas. If you have a single bedroom, place the sensor inside the room. Smoke detectors are also recommended in a central area such as a living room or basement.

Do not install:
-Near a sink, stove, or oven
-Near old doors or windows that could be drafty
-Where airflow could be obstructed by curtains or furniture.

 2. Using the screws provided, mount the back plate to the ceiling at least 12” from the wall.


3. Align the bump on the smoke detector head below the arrow on the mounting base. Twist the smoke head clockwise to lock it in place.



Audible Signal: 85dBA when in alarm.

Operating Temperature: 40° - 100°F

Batteries: 3 AAA PC2400 Duracell Procell or Energizer E92




Was this article helpful?
1 out of 1 found this helpful



Article is closed for comments.