The IQ Siren is an additional siren to the one on your control panel. It plugs into any standard outlet and acts as a repeater in the Z-Wave network. It also has a rechargeable back up battery and three LED lights that strobe when the siren is triggered.
1. Plug in the siren at the desired location within 25-30ft of the control panel.
2. Start by swiping down the Gray Rectangle Bar above time.
3. Press "Settings".
4. Press "Advanced Settings".
5. Enter Installer Code (Press "1111")
*Note: If the default code does not give you access, Click here for further assistance.
6. Press "Installation".
7. Press "Devices".
8. Press "Z-Wave Devices".
9. Press "Add Device".
10. Press "Pair".
11. Quickly press the button twice on the bottom of the IQ Siren to enroll with the IQ Panel. (LED will flash)
12. At this point, select the proper name for the siren. Finish the pairing by selecting Add.