The carbon monoxide (CO) detector monitors CO levels and gives early warning when potentially dangerous levels exist. The CO detector transmits an alarm signal to the control panel when detecting dangerous concentrations of CO gas.
1. Remove the back plate from the body by twisting the back plate counterclockwise.
2: Insert the battery into the empty slot on the body of the CO detector.
3: Reconnect the back plate to the body by twisting the back plate clockwise.
4: Mount the CO detector on a wall in an area where you be able to hear the interior siren if there is an alarm.
Make sure the CO detector is within 75 feet of the control panel.
5: Mount the back plate to the wall using the screws included. Insert the screws in the areas marked below.
Audible Signal: 85 dBA in alarm
Temperature Range: 40°F to 100°F
Power Source: One 3-volt CR123A Panasonic Lithium Battery