Qolsys Flood Sensor Installation

The IQ Flood detects the presence of flooding before extensive damage is done

a.png

1. Pull out the battery tabs on the side of flood sensor

b.png

2. Find a location that might be at risk for flooding in your homec.png

3. Apply the tape to the back of the transmitter and remove the backing from the tape.

cc.png

4. Place transmitter on wall and the probe on the floor where the water is detected

d.png

5. The probe should be screwed to the floor for best results

e.png

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.