Interlogix Concord - Cellular Setup Trouble

If you are getting one flash on LED 1 this means the panel is having trouble communicating with the cellular module

1. Power Cycle the panel

2. Press 8 then enter the Installer Code 4321 then press 3

3. Within 5 seconds press 1 then enter the Installer Code again

4. Keypad beeps and enters then exits programming, check with website to see if successful

If it does not work the first time try performing steps 2 and 3 again. If the problem still persist please contact Safemart Technical Support.


Was this article helpful?
0 out of 1 found this helpful



Please sign in to leave a comment.