Honeywell Vista - Deleting Sensors

Here is how to remove sensors from the programming in an Ademco Vista or Safewatch Pro 2000 or 3000.

 

1.  Enter programming (4112)+(800)

     Note: Default Installer Code is "4112", but if you changed the code, use your own.

Installer_Code.png

2.  Enter (*)+(56) for zone programming.

Field.png

3.  If it asks if you want to "Set to confirm" press (0).

set_to_confirm.png

4.  Enter the (Zone Number) you wish to delete and press (*)+(*) 

enter_zn_num.png

5.  When it shows the "Zone Type" enter (00)+(*)+(1)

01_zone_type.png

6.  You should then be back at the "Enter Zone Number" screen. Either repeat for the next zone or press (00)+(*)+(99)
disarmed.png     enter_zn_num.png
   
Was this article helpful?
0 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.