Disabling your trouble beeps should only be done when you're aware of the reason why it's beeping

  • Frequent or recurring power outages

  • Low System/Sensor Battery Alerts 


1. Press GEAR icon at the bottom right then press DOWN ARROW 3 times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter the Installer Code 4321 then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press SIREN OPTIONS then UNCHECK Trouble Beeps then press CLOSE to exit

Installer_Programming_Siren_Options.jpg Programming_-_Siren_Options_01_Trouble_Beeps.png

4. Press CLOSE again to exit programming



Was this article helpful?
4 out of 5 found this helpful



Please sign in to leave a comment.