Simon XTi - Door Window Sensor Programming

1. Press bottom right GEAR icon then press DOWN ARROW several times

 

2. Press ENTER by System Programming then enter Installer Code 4321

 

3. Press SENSORS then press LEARN SENSOR

 

4. Open sensor cover or open cover then press Learn button to learn

Sensor_Tamper.jpg

5. Simon XTi beeps, press EDIT by sensor group then enter 10 or 13 then press SAVE

 

    10 = Delay sensor - Entry delay time if armed, program this for front or garage doors

    13 = Instant sensor - Arms with no entry delay, program this for windows or patio doors

6. Press EDIT by Sensor Name then press EDIT by word

 

7. Scroll words then press to select then press SAVE to exit

8. Press CLOSE several times to exit programming

Home.jpg

 

Was this article helpful?
10 out of 12 found this helpful

Comments

5 comments
  • Finally able to find group codes.....thx!

    0
    Comment actions Permalink
  • sensors didnot show up 

    1
    Comment actions Permalink
  • Do we need to call Livewatch to register the new sensors ?

    -2
    Comment actions Permalink
  • "Sensors" option did not show up

    1
    Comment actions Permalink
  • Nevermind, I overlooked the verbiage found for step 4. If you don't see the "options" for sensors it's because you might be using your master code and not the installer code. 

    1. Apply your "Installer Code", which is "4321".

    Please note that your master passcode will not give you the option to add a sensor.

    -1
    Comment actions Permalink

Please sign in to leave a comment.