Simon XTi - Increase the Image Sensor Signal Strength

There may be a time where you need it increase the signal strength of your image sensor. The instructions below will help you maximize the signal strength to ensure connectivity:

 To check your signal strength on your image sensor:

1. Press the GEAR Icon

1.jpg

2. Press the DOWN ARROW icon several times

Scroll_to_page.jpg

3. Press ENTER by Programming

Programming_enter.jpg

4. Enter 4321 then press OK 

xtis-eac-0.jpg

5. Press INTERACTIVE SERVICES

Programming_interactive_services_circled.jpg

6. Press IMAGE SENSOR  

Interactive_Services_image_sensor_circled.jpg

7. Press STATUS

Image_sensor_status_circled.jpg

8. The signal strength is displayed. We recommend that the device has more than 30% strength.

Image_Sensor_signal_strength.jpg

 

To increase this range: 

Image_Sensor_improving_range_1.png

Image_Sensor_improving_range_2.png

 

If you are still not getting over 30% signal you will want to verify that the antenna inside the Simon XTi is placed as displayed below:

Image_Sensor_daughter_board.png

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.