Simon XTi - Deleting Trane Thermostats

1.  Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

 3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

4. Press REMOVE DEVICE to start deleting process

Z-Wave_Delete_01.png Z-Wave_Delete_02.png

5. On the thermostat press the MENU button then scroll down to ZWave Install and press SELECT button

 

6. Press UP ARROW to delete then button below DONE to exit

 

7. Simon XTi beeps and displays “Device deleted”, press CLOSE to exit  

Z-Wave_Delete_03.png

8. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

9. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.