1. Help Center
  2. Panel Programming
  3. Simon XTi

Simon XTi - Adding Trane Thermostats

Avatar
Follow

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

 4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. On the thermostat press the MENU button then scroll down to ZWave Install and press SELECT button

 

6. Press UP ARROW button for YES then press DONE to exit

7. Simon XTi beeps if successful, press CLOSE to exit

Z-Wave_Add_04_Added.png

8. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

9. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.

Articles in this section

See more