Simon XTi - Smoke Detector Programming

1. Press bottom right GEAR icon then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter Installer Code 4321 then press OK

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press SENSORS then LEARN SENSOR

Programming_-_Learn_Sensor_01.png Programming_-_Learn_Sensor_02.png

4. Simon XTi enters sensor learn mode

Programming_-_Learn_Sensor_03.png

5. Twist smoke detector counter-clockwise and remove from base to learn

Picture1.png

 6. Press EDIT by Sensor Group then enter 26 then press SAVE to exit

Programming_-_Learn_Sensor_04b_Sensor_Group.png Edit_Sensor_Group.jpg

7. Press EDIT by Sensor Name then press EDIT by 1st, 2nd or 3rd word

Programming_-_Learn_Sensor_04c_Sensor_Name.png Programming_-_Learn_Sensor_07_Sensor_Name.png

8. Scroll words with Arrow buttons , press to select then press SAVE then CLOSE to exit

Programming_-_Learn_Sensor_08_Sensor_Name_List_1.png Programming_-_Learn_Sensor_07a_Sensor_Name_Exit.png

9. Press CLOSE several times to exit programming

Programming_-_Learn_Sensor_09_Exit_Sensor_Exit.png Home.jpg

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.