1. Help Center
  2. Interlogix Simon XTi
  3. Simon XTi Troubleshooting

Simon XTi - Sensor Groups

Avatar
Follow

To check what group your sensor is assigned to:

1. Press bottom right GEAR icon then press DOWN ARROW several times

 

2. Press ENTER by System Programming then enter Installer Code 4321

 

3. Press SENSORS then press EDIT SENSOR

sensors.png edit_sensor_2.png

4. Press EDIT by sensor then press SENSOR GROUP

Programming_-_Edit_Sensors_02.png Programming_-_Edit_Sensors_03.png

5. Enter sensor group (see list below) then press SAVE then CLOSE several times to exit

Programming_-_Learn_Sensor_06.png Programming_-_Edit_Sensors_03a.png

The following are the most common sensor groups

  • Group 01 = Remote Panic, Keyfob or Touchpad with Audible Police Panic
  • Group 03 = Remote Panic, Keyfob or Touchpad with Silent Police Panic
  • Group 06 = Remote Panic, Keyfob or Touchpad with Auxiliary Medical Panic
  • Group 10 = Entry and Exit Door
  • Group 13 = Window Sensor
  • Group 14 = Interior Door Sensor
  • Group 17 = Indoor Motion Detector
  • Group 26 = Smoke or Heat Detector
  • Group 29 = Freeze Sensor
  • Group 34 = Carbon Monoxide Detector
  • Group 38 = Water Flood Sensor
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Article is closed for comments.

Articles in this section

See more