Simon XTi - Adding Z-Wave Siren

 

1. Press the GEAR icon at the bottom right press DOWN ARROW to scroll down several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg 

2. Scroll down to PROGRAMMING and press ENTER then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg 

3. Press INTERACTIVE SERVICES then press Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png 

4. Press ADD DEVICE to start learning process

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png 

5. Press the PROGRAM SWITCH on the back of the siren twice until the Simon XTi beeps

22.JPG

6. The Simon XTi displays "Device xx added", press CLOSE to exit

Z-Wave_Add_04_Added.png

7. Press CLOSE to exit Z-Wave Menu then Interactive Services

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.