Simon XTi - Deleting Z-Wave Siren

1.  Press the GEAR icon at the bottom right then press DOWN ARROW several times

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then press REMOVE DEVICE

Interactive_Services_01_Main_Select.jpg Z-Wave_Delete_01.png

4. The Simon XTi enters Z-Wave delete mode

Z-Wave_Delete_02.png

5. Press the Program Switch until you hear the Simon XTi beep

22.JPG

 6. After a few seconds the Simon XTi beep and shows Device deleted, press CLOSE to exit  

Z-Wave_Delete_03.png

7. Press CLOSE twice to exit Z-Wave menu then Interactive Services menu

Z-Wave_Add_05_Advanced_Menu_Exit.png Z-Wave_Add_06_Z-Wave_Menu_Exit.png

8. Press CLOSE again to exit programming

Z-Wave_Add_07_Installer_Menu_Exit.png Main_Screen.jpg

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.