Simon XTi - 60-741-95 Recessed Door Sensor Installation

Recessed Door Sensor (60-741-95) Installation:

S-A_S-B.PNG

 

Enrolling The Device:

Select one of the following systems to enroll the device:

Simon XT - Click Here

Simon XTi - Click Here

Concord - Click Here

Mounting The Contact: Make Sure To Enroll The Device Before This Step!

1. Once you have found the door, mark the area you would like to install the device. (You will find some useful options below)

13.JPG

2. To install the device you will need an electric drill with a 5/8 drill bit. Slowly drill the first hole for the magnet (Section B). 

11_magnet.JPG

Insert the magnet (Section B) into the framing.

 1.jpg

Using a 5/8 drill bit, drill the mating hole for the contact (Section A). 

7_door.JPG

Insert the contact (Section A) inside the second hole on the inside of the door.

2.jpg

 

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.