My camera's LED is not turning on. How do I fix this?

If the "Status LED" on your camera will not come on, then your camera may be "Bricked". This means that your camera is in an unusable condition. Please follow the instructions below to fix the camera. 

  1. Power down the camera for 30 seconds
  2. Power the camera back up while holding down the reset button. Keep pressing the reset button for 20 seconds (no more)
  3. Let the camera sit for 3 minutes. 
  4. If the "Status LED" does not come back on then repeat steps 1 thru 3. 
  5. If it does not work after the 3rd time please contact Technical Support.
Presentation1.jpg
Presentation1.jpg
Presentation2.jpg
Presentation1.jpg
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.