Simon XTi - Adding Z-Wave Door Lock

1.  Press the GEAR icon then press DOWN ARROW several times until Programming appears

Enter_Programming_01_Main.jpg Enter_Programming_02_Settings.jpg

2. Press ENTER by Programming then enter your Master Code

Enter_Programming_03_Programming_Enter.jpg Enter_Programming_04_Enter_Code.jpg

3. Press INTERACTIVE SERVICES then Z-WAVE

Interactive_Services_01_Main_Select.jpg Z-Wave_Add_01_Interactive_Services_Menu.png

4. Press ADD DEVICE

Z-Wave_Add_02_Z-Wave_Menu.png Z-Wave_Add_03_Add.png

5. Remove side screws then remove battery cover then press the left LEARN button

Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation

2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute

hero_01.png

Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes

final_diez_2.jpgfinal_diez.jpg

Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate

2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone

3. Press 7 then # to enroll, lock should sound a "Happy" tone

0cd5bc9a8410e9b34132defb5bd76b5b08fd4e90_lock-clearcut.jpg

6. Simon XTi beeps if successful, press CLOSE twice to exit Z-Wave programming

Z-Wave_Add_04_Added.png Z-Wave_Add_05_Advanced_Menu_Exit.png

7. Press CLOSE twice again to exit programming

Z-Wave_Add_06_Z-Wave_Menu_Exit.png Z-Wave_Add_07_Installer_Menu_Exit.png

Was this article helpful?
4 out of 4 found this helpful

Comments

2 comments
  • I was able to add another door lock easily by following the instructions above. Thanks for the very clear and easy to follow instructions that you made.

  • These instructions are nearly perfect. I found them clear and easy to follow. Soooooo much better than the instructions from Kwikset (they were worthless!)

    I would only have them say to hit close repeatedly on step 15 in order to reach the home screen. Other than that, they were perfect .......

Please sign in to leave a comment.