1. Press the GEAR icon then press DOWN ARROW several times until Programming appears
2. Press ENTER by Programming then enter your Master Code
3. Press INTERACTIVE SERVICES then Z-WAVE
4. Press ADD DEVICE
5. Remove side screws then remove battery cover then press the left LEARN button
Schlage Deadbolt
1. Enter the six-digit programming code provided in the Schlage documentation
2. Press the SCHLAGE button then 0, The Schlage button flashes orange for a minute
Kwikset Deadbolt
Open the battery cover and press the left button then wait for 2 minutes
Yale Touchscreen Deadbolt
1. Touch the screen with the back of your hand or fingers to activate
2. Enter the 4 to 8 digit Master PIN code then press #, lock should sound a "Happy" tone
3. Press 7 then # to enroll, lock should sound a "Happy" tone
6. Simon XTi beeps if successful, press CLOSE twice to exit Z-Wave programming
7. Press CLOSE twice again to exit programming
Comments
2 comments
I was able to add another door lock easily by following the instructions above. Thanks for the very clear and easy to follow instructions that you made.
These instructions are nearly perfect. I found them clear and easy to follow. Soooooo much better than the instructions from Kwikset (they were worthless!)
I would only have them say to hit close repeatedly on step 15 in order to reach the home screen. Other than that, they were perfect .......
Please sign in to leave a comment.