Honeywell Lynx Touch - Program Remote Keyfobs

Programming a Keyfob on a Lynx Touch

1. Press MORE tab at bottom right then press TOOLS then enter the Installer Code 4112

Home Page1.jpg Home Page More2.jpg Enter Code.JPG

2. Press PROGRAM then press KEYS then ADD NEW

Tool - program1.jpg System_programming1.jpg 22.png

3. Press KEY TYPE to toggle number of keys on the keyfob

33.png

4. Enter the serial number on back of the keyfob or press any key to learn then press DONE to exit

4.png    keyfob.jpg
5. Press USER then select an existing user who will use the keyfob

55.png 66.png

6. Press Button keys to select button action

77.png 


7. Press SAVE to exit

 

Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.