IQ Panel - Program Entry Exit Delay Time

1.Press SETTINGS wrench icon then enter Installer Code 1111

Enter_Programming_01.png Enter_Programming_02.png

2. Press INSTALLATION then TIMER

Entry_Exit_Time_01_Installation.jpg Entry_Exit_Time_02_Timer.jpg

3. Press PENCIL by NORMAL ENTRY EXIT DELAY then ENTRY DELAY or EXIT DELAY

Entry_Exit_Time_03_Main.jpg Entry_Exit_Time_04_Settings.jpg

4. Press DEL X to erase old time then enter new time 30 to 240 seconds then press DONE

 Entry_Exit_Time_05a_Enter_Time.jpg Entry_Exit_Time_05b_New_Time.jpg

5. Press SAVE then BACK or the HOME button to exit

Entry_Exit_Time_06_Save.jpg Entry_Exit_Time_07_Exit.jpg

Was this article helpful?
0 out of 1 found this helpful

Comments

2 comments
  • Installer code doesn't work - says it's invalid. Just asks for user code and no installation icon is available to get to delay settings.

    0
    Comment actions Permalink
  • That happened to me too. They change the code and don't tell you. I had to call to get it. In this respect, customer service is lacking in my opinion.

    0
    Comment actions Permalink

Please sign in to leave a comment.