IQ Panel - Change Sensor Settings

1. Press SETTINGS then enter Installer Code 1111

Enter_Programming_01.png Enter_Programming_02.png

2. Press INSTALLATION then SECURITY SENSORS

Learn_Sensor_01_Installation.jpg Learn_Sensor_02_Security_Sensors.jpg

3. Press EDIT SENSOR then press PENCIL icon to the right of sensor

Edit_Sensor_00.png Edit_Sensor_01_List.png

4. Press SENSOR TYPE then select type of sensor

Edit_Sensor_04_Sensor_Type.png Edit_Sensor_04a_Sensor_Type.png

5. Press SENSOR NAME then select name or press CUSTOM DESCRIPTOR

Edit_Sensor_05_Descriptor.png Edit_Sensor_05a_Descriptor.png

6. If CUSTOM DESCRIPTOR was selected enter name then press DONE

Edit_Sensor_05a_Custom_Descriptor.png

7. Press CHIME TYPE then select chime tone

Edit_Sensor_06_Sensor_Chime_Types.png Edit_Sensor_06a_Sensor_Chime_Types.png

8. Press SENSOR GROUP then select sensor type

Edit_Sensor_07_Sensor_Groups.png Edit_Sensor_07a_Sensor_Groups.png

9. Press VOICE PROMPTS then ON or OFF to enable or disable Voice Chime

Edit_Sensor_08_Voice_Prompts.png Edit_Sensor_08a_Voice_Prompts.png

10. Press SAVE then BACK or the HOME button to exit

Edit_Sensor_09_Save.png WiFi_Enable_09_Exit.jpg

Was this article helpful?
1 out of 1 found this helpful

Comments

0 comments

Please sign in to leave a comment.