Qolsys IQ Panel - Programming An IQ2 Remote Touchscreen

1. Connect the power supply to the back of the IQ2. Then press and hold the power button until the screen illuminates (approx 3-5 sec).

2. On the IQ Remote Touchscreen press SETTINGS then enter 1111 or 2222

 

3. Press WIFI SETTINGS then connect to your personal WIFI network

 

4. Press BACK ARROW then press ABOUT

 

5. Locate the IP Address and write it down. You'll need this in a moment.

 

6. Go to your IQ panel and press SETTINGS then enter your Master Code

 

7. Press INSTALLATION then SECURITY ACCOUNT

 

8. Scroll down and enable the box for IQ2 Panel then press BACK twice to exit

 

9. Press IQ2 DEVICES then press ADD NEW

 

10. Enter the DEVICE NAME then enter the IP ADDRESS found earlier then press SAVE

 

 

 

Was this article helpful?
2 out of 3 found this helpful

Comments

0 comments

Article is closed for comments.